CHOOSE OUR COATINGS

OUR ATTENTION, YOUR REASSURANCE

Matters needing attention in the use of special fluorocarbon paint for steel structure

2023-12-28


1. according to the provisions of the proportion of mixing, stirring, full reaction after aging into use, adjust good fluorocarbon paint must be used up within 6 hours, in order to avoid more than the activation period of waste

2. The fluorocarbon paint should be placed in dry, waterproof, leak-proof, sunscreen, high temperature, away from fire

3. Use iron brush or sandblasting to remove rust spots, old paint film, sand and other unsecured attachments. The base surface shall be free of rust, oil stain, oxide skin and other unsecured attachments. It is best to use sand blasting or shot blasting to remove rust on the steel surface, and the sand blasting to remove rust reaches Sa2.5. Manual derusting reaches St3 level.

4. This manual is the accumulation of our practice and experience, can be used as a construction guide, in view of the product conditions of use not our control, we are only responsible for the quality of the paint itself, this manual does not contain any guarantee components