CHOOSE OUR COATINGS

OUR ATTENTION, YOUR REASSURANCE

The construction method of epoxy anticorrosive coating mainly includes the following steps

2023-12-28


The construction method of epoxy anticorrosive coating mainly includes the following steps:

1. Surface treatment: The surface of the coated object must be thoroughly cleaned and derusted to ensure that the epoxy coating can be firmly attached to the surface.

2. Primer coating: first brush a layer of epoxy primer, used to enhance the adhesion and corrosion resistance of the coating.

3. In the coating coating: brush a layer of epoxy coating, increase the thickness of the coating and corrosion resistance.

4. Surface coating: Finally, a layer of epoxy surface coating is applied to form a uniform and beautiful protective film.

Drying and curing: After the coating is completed, it is necessary to dry and cure at the specified temperature and time to completely cure the coating.

Epoxy anticorrosive coating has good anti-corrosion performance and weather resistance, can effectively extend the service life of the protected object, is a commonly used anti-corrosion coating. When using epoxy anticorrosive coatings, it is necessary to select the appropriate coating type and construction method according to the specific use environment and requirements.