Home
About Us
Company Profile
News
Honor
Products
Water-based paint
Electroplating varnish
Real copper do old paint
Fluorocarbon coating
UV coating
Ion plating paint
Silver powder paint
Special Effect Paint
Anticorrosive coating
Curing agent series
Diluent Series
Integrated Product Series
Product Application Industry
Product Effect
Service
Paint Q & A
Paint disease control
Encyclopedia of water paint
Contact Us
Online message
Talent Recruitment
Contact Information
Plant rental
Shopping Mall
Language
中文版
English
Industry dynamics
Company News
Matters needing attention in the use of special fluorocarbon paint for steel structure
1. according to the provisions of the proportion of mixing, stirring, full reaction after aging into use, adjust good fluorocarbon paint must be used up within 6 hours, in order to avoid more than the activation period of waste2. The fluorocarbon paint should be placed in dry, waterproof, leak-proof, sunscreen, high temperature, away from fire3. Use iron brush or sandblasting to remove rust spots, old paint film, sand and other unsecured attachments. The base surface shall be free of rust, oil stain, oxide skin and other unsecured attachments. It is best to use sand blasting or shot blasting to remove rust on the steel surface, and the sand blasting to remove rust reaches Sa2.5. Manual derusting reaches St3 level.4. This manual is the accumulation of our practice and experience, can be used as a construction guide, in view of the product conditions of use not our control, we are only responsible for the quality of the paint itself, this manual does not contain any guarantee components
28
2023-12
Performance and use of high hardness curing agent
Performance: Curing agent is a kind of material or mixture that promotes or controls the curing reaction. Resin curing is through condensation, closed-loop, addition or catalytic chemical reactions, so that the thermosetting resin irreversible change process, curing is completed by adding a curing crosslinking agent.Uses: widely used in a variety of two-component varnish, polyurethane paint, matte paint, primer, glass paint and other requirements of high hardness and full degree of good products