Products
Powerd by www.300.cn Changzhou
Service Hotline：+86-519-87833337
Industrial Paint with Quality Ingenuity
Provide eco-friendly high-quality innovative products
Acrylic Lacquer
Product introduction
The product is made of acrylic resin, auxiliaries and solvent. It has the properties of chemical resistance, light protection, color protection, and excellent weatherability. It is applied to the protection of the cover light after the plating of hardware.
The product features
1. Good transparent.
2. Good adhesion
3. Good abrasion resistance, solvent resistance and scratch resistance.
Technical indicators of raw lacquer
1. Viscosity: 9-11 seconds.
2. Solid content: 25-28%.
3. Resistance: 5-10 megaohm.
4. Color: clear water white.
Summary of test results
| Inspection items | The inspection results | Inspection methods |
| Bending test, mm | 3 | GB/T 6742-2007 |
| Row test, level | 1 | GB/T 9286-1998 |
| Impact resistance, cm. | 10 | GB/T 1732-1993 |
| Pencil hardness (scratch) | 2H | GB/T 6739-2006 |
| Gas resistant, water resistant. | No change, no change. | GB/T 9274-1988，1733-1993 a method of |
| Lead, mercury, cadmium, mg/kg. | Did not check out | IEC 62321:2008 |
| Hexavalent chromium, polybromodiphenyl ether, mg/kg. | Did not check out | IEC 62321:2008 |
Suitable for the workpiece
Pull head, sign, belt buckle, lock, lock, door handle, handle, hinge, button, bottle cap, floor drain, floor plug, lamp, accessories and other hardware products.
Product use
It is suitable for all kinds of metal products, such as gold, light gold, bronze, gun black, nickel, pearl gold, pearl nickel, electroplating silver, electroplating, etc.
Directions for use
1. Paint mix: working fluid.
2. Baking temperature, holding 30 ~ 60 minutes, 100 ~ 150 ℃ (according to the actual working situation, please adjust the temperature and time)
3 spraying method: manual spraying and electrostatic spraying.
4. Storage period :(room temperature) 12 months.
5. Packing specification: 20KG/ barrel.
Precautions for Use
1. Filter the filter with 300 mesh for a few minutes and then spray it after the bubble is removed.
2. The surface of electroplating products must be cleaned, degreased and dusted.
3. The spray is good products in 100 ~ 150 ℃ oven bake for 30 minutes, 24 hours after the may make performance test
4. Please stir the coating evenly before use to avoid the color difference caused by precipitation.
5. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.
6. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems arising in the process.
Product renderings display
