Products
Powerd by www.300.cn Changzhou
Service Hotline：+86-519-87833337
Industrial Paint with Quality Ingenuity
Provide eco-friendly high-quality innovative products
Highlight High-hardness Electroplating Gloss Oil
Product introduction
The product by imported acrylic resin, additives and solvent polymerization, salt fog resistance, resistance to acid and alkali chemical performance, such as surface hardness, wear-resisting, feel is smooth, belongs to the comprehensive performance strong resistance to salt spray plating light oil, widely used has a high requirement of galvanizer shields light, polishing workpiece.
The product features
1. Good transparency and high hardness (up to 4H)
2. Strong salt tolerance, acid salt fog can reach up to 72 hours.
3. Good adhesion and salt mist for more than 120 hours.
Technical indicators of raw lacquer
1. Viscosity: 9-11 seconds.
2. Solid content: 25-28%.
3. Resistance: 5-10 megaohm.
4. Color: clear water white.
Summary of test results
| Inspection items | The inspection results | Inspection methods |
| Bending tests，mm | 3 | GB/T 6742-2007 |
| Row test, level | ≤1 | GB/T 9286-1998 |
| Impact resistance, cm | 50 | GB/T 1732-1993 |
| Pencil hardness (scratch) | 4H | GB/T 6739-2006 |
| Acid salt fog | 72 hours | |
| Lead, mercury, cadmium，mg/kg | Did not check out | IEC 62321:2008 |
| Neutral salt mist | No change in 120h paint film | GB/T 1771-2007 |
Suitable for the workpiece
Pull head, sign, belt buckle, lock, lock, door handle, handle, hinge, button, bottle cap, floor drain, floor plug, lamp, accessories and other hardware products.
Product use
It is suitable for all kinds of metal products, such as gold, light gold, bronze, gun black, nickel, pearl gold, pearl nickel, electroplating silver, electroplating, etc.
Directions for use
1. Paint mix: working fluid.
2. Baking temperature, holding 30 ~ 60 minutes, 100 ~ 130 ℃ (according to the actual working situation, please adjust the temperature and time)
3. Spraying method: manual spraying and electrostatic spraying.
4. Storage period :(room temperature) 12 months.
5. Packing specification: 15KG/ barrel.
Precautions for Use
1. Before and after construction, the material must be cleaned to ensure that there is no impurity, no pollution and no moisture.
2. Please stir the coating evenly before use to avoid the color difference caused by precipitation.
3. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.
4. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems in the process.
