Champagne Paint for Floor Sockets

    

 

Product introduction

The product is made of acrylic resin, coloring pigment, filler, organic solvent, auxiliary agent, etc., and it has good flow, good adhesion, gloss, and no yellowing.

 

The product features

1. Full color

2. Good abrasion resistance, solvent resistance and scratch resistance.

3. Water resistant

 

Technical indicators of raw lacquer.

1.Viscosity: 100 + 5 seconds.

2.Solid content: 50-60%.

3.Color: champagne

 

Summary of test results

Inspection items The inspection results Inspection methods
Inspection items 3 GB/T 6742-2007
Row test, level ≤1 GB/T 9286-1998
Impact resistance, cm. 50 GB/T 1732-1993
Pencil hardness (scratch) H GB/T 6739-2006
Lead, mercury, cadmium, polybrominated biphenyls, mg/kg. Did not check out IEC 62321:2008

 

Suitable substrate

Copper, iron, aluminum, zinc alloy, stainless steel plate, etc.

 

Product use

Suitable for all kinds of high-grade hardware products coating, floor board special surface painting.

 

Directions for use

1. Paint ratio: paint 1: thinner 1.

2. Baking temperature, holding 30 ~ 60 minutes, 100 ~ 130 ℃ (according to the actual working situation, please adjust the temperature and time)

3. Spraying method: manual spraying and electrostatic spraying.

4. Storage period :(room temperature) 12 months.

5. Packing specification: 20KG/ barrel.

 

Precautions for Use

1. Before and after construction, the material must be cleaned to ensure that there is no impurity, no pollution and no moisture.

2. Please stir the coating evenly before use to avoid the color difference caused by precipitation.

3. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.

4. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems in the process.