Special fluorocarbon paint for steel structure



Product introduction

This product is made up of fluorocarbon resin as the main component of a two-component coating, applicable to all kinds of steel structure, highway guardrail, transportation machinery, mechanical equipment and other metal surface corrosion protection and decoration, extend the steel structure of use fixed number of year.


The product features

1. Super weather resistance, corrosion resistance and strong self-cleaning.

2. Strong adhesion, waterproof, anti-aging, acid and alkali resistance.

3. No cracking, powder resistance and wear resistance.


Technical indicators of raw lacquer

Color: according to color card or customer request.


Product use

For severe corrosive environment protection durable decorative paint and metal structure of steel structure, concrete structure and masonry surfaces, asbestos cement, lumber, polyurethane and other solid surface below


Directions for use

1. Paint mix: (original paint 1: curing agent 0.1: thinner 0.3)

2. Baking temperature, holding 30 ~ 60 minutes, 60 ~ 100 ℃ (please according to the actual working situation to adjust temperature and time) or room temperature cured 7 days

3. Spraying method: manual spraying and electrostatic spraying.

4. Storage period :(room temperature) 12 months.

5. Packaging specifications: fluorocarbon paint 20KG/ barrel, 3390 curing agent :2KG/ barrel, fluorocarbon diluent :15KG/ barrel.


Precautions for Use

1. Proportioning in proportion to the prescribed proportions, stirring evenly, fully reacting and ready to be used, the fluorocarbon paint must be used up within 6 hours to avoid the expiration of the activation period.

2. The fluorocarbon paint should be kept in dry, waterproof, leakproof, sunblock, high temperature and away from fire.

3. Use iron brush or sandblast to remove rust spots, old paint film, sand grains, etc. The base surface requires no rust, oil, oxide skin, etc. The steel surface is best to use sandblast or shot blasting, sand blasting to reach Sa2.5 level. Manual derusting has reached St3 level.

4. This instruction manual is an accumulation of our practice and experience, which can be used as a guide for construction. In view of the non-control of the use conditions of the products, we are only negative.