Bronze/Copper/Brass Paint

    

 

Product introduction 

The product is made of imported resin, pigment, additive, additive and solvent. It has the effect of electroplating red antique copper, and does not change color, can protect for ten years. Electroplating red copper 3-12 months of discoloration oxidation blackspots. The construction is convenient, and it is not limited by the workpiece size, base material, site, equipment and so on. Low investment, low energy consumption, low cost and low pollution are the preferred technologies to replace electroplating products at present.

 

The product features

1. Not limited product base material, substitute true copper.

2. The luster is even, the feel is good, the copper feels strong.

3. Environmental protection and operation process are simple and easy to learn.

4. Anti-acid and alkali resistance, anti-aging and fluorocarbon paint outdoor 20 years of basic colorfast.  

 

Technical indicators of raw lacquer

1. Viscosity: 100 + 10 seconds.

2. Solid content: 40 + + 5%.

3. Color: imitation bronze, copper, brass and other colors.

 

Suitable substrate 

Iron, zinc alloy, aluminum alloy, stainless steel, acrylic, plastic ABS, marble, gypsum, wood, glass, ceramics, etc.

 

Product use 

Suitable for door, window, aluminium, and a large structure, locks, stair handrail, arts and crafts, light pole, vases, lamps and lanterns, furniture, fan, condole top, bottom ark, glass, plastic, metal, marble, ceramics, wood, gypsum products and so on

 

Directions for use

1. Operation process: pre-treatment, spray primer, spray copper paint, spray brushed (black silk, blue silk, grey silk), brushed (baijib), spray paint.

2. Paint mix: high temperature baking (paint 1: thinner 1), two components (paint 1: thinner 1: curing agent 0.5)

3. The baking temperature: type high temperature (120 ~ 150 ℃), two-component (60 ~ 100 ℃)

4. Spraying method: manual spraying, electrostatic spraying.

5. Storage term :(room temperature) 12 months.

6. Packing specifications: 3KG, 20KG/ barrel.

 

Precautions for Use

1. Before and after construction, the material must be cleaned to ensure that there is no impurity, no pollution and no moisture.
2. Please stir the coating evenly before use to avoid the color difference caused by precipitation.
3. The distance between the muzzle and the workpiece is kept between 15 and 20 cm, avoiding the flow of hanging, orange peel.
4. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.
5. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems in the process.