Low-temperature Electroplating Gloss Oil



Product introduction

The products are made of special resin, additives, additives and solvents. Dry at low temperature and bake at 80 degrees. The film has good adhesion, full brightness, good corrosion resistance and good hardness. It is especially suitable for the protection of the cover light, which can not be roasted at high temperature, plastic parts, imitation gold after electroplating, black of gun, bronze color and K gold.


The product features

1. Bake at a low temperature of 80 degrees.

2. Good adhesion and salt resistance. 

3. Good transparency and high gloss.


Technical indicators of raw lacquer

1. Viscosity: 9-11 seconds.

2. Solid content: 30%

3. Resistance: 5-10 MHZ

4. Color: clear water white.


Suitable for the workpiece

Pull head, sign, belt buckle, lock, lock, door handle, handle, hinge, button, bottle cap, floor drain, floor plug, lamp, accessories and other hardware products.


Product use

Suitable for hardware, plastic, post-plating imitation gold, gun black, bronze color, K gold protection.


Directions for use

1. Paint mix: working fluid.

2. Baking temperature, holding 30 ~ 40 minutes, 60 ~ 80 ℃ (according to the actual working situation, please adjust the temperature and time)

3. Spraying method: manual spraying and electrostatic spraying.

4. Storage period :(room temperature) 12 months.

5. Packing specification: 15KG/ barrel.


Precautions for Use

1. Before and after construction, the material must be cleaned to ensure that there is no impurity, no pollution and no moisture.

2. Please stir the coating evenly before use to avoid the color difference caused by precipitation.

3. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.

4. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems in the process.