Highlight High-hardness Electroplating Gloss Oil

    

 

Product introduction

The product by imported acrylic resin, additives and solvent polymerization, salt fog resistance, resistance to acid and alkali chemical performance, such as surface hardness, wear-resisting, feel is smooth, belongs to the comprehensive performance strong resistance to salt spray plating light oil, widely used has a high requirement of galvanizer shields light, polishing workpiece.

 

The product features

1. Good transparency and high hardness (up to 4H)

2. Strong salt tolerance, acid salt fog can reach up to 72 hours.

3. Good adhesion and salt mist for more than 120 hours.

 

Technical indicators of raw lacquer

1. Viscosity: 9-11 seconds.

2. Solid content: 25-28%.

3. Resistance: 5-10 megaohm.

4. Color: clear water white.

 

Summary of test results

Inspection items The inspection results Inspection methods
Bending tests,mm 3 GB/T 6742-2007
Row test, level ≤1 GB/T 9286-1998
Impact resistance, cm 50 GB/T 1732-1993
Pencil hardness (scratch) 4H GB/T 6739-2006
Acid salt fog 72 hours  
Lead, mercury, cadmium,mg/kg Did not check out IEC 62321:2008
Neutral salt mist No change in 120h paint film GB/T 1771-2007

 

Suitable for the workpiece

Pull head, sign, belt buckle, lock, lock, door handle, handle, hinge, button, bottle cap, floor drain, floor plug, lamp, accessories and other hardware products.

 

Product use

It is suitable for all kinds of metal products, such as gold, light gold, bronze, gun black, nickel, pearl gold, pearl nickel, electroplating silver, electroplating, etc.

 

Directions for use

1. Paint mix: working fluid.

2. Baking temperature, holding 30 ~ 60 minutes, 100 ~ 130 ℃ (according to the actual working situation, please adjust the temperature and time)

3. Spraying method: manual spraying and electrostatic spraying.

4. Storage period :(room temperature) 12 months.

5. Packing specification: 15KG/ barrel.

 

Precautions for Use

1. Before and after construction, the material must be cleaned to ensure that there is no impurity, no pollution and no moisture.

2. Please stir the coating evenly before use to avoid the color difference caused by precipitation.

3. The air in the construction site needs to be clean and clear. This product is flammable. Do not close the fire.

4. The company's products should be used together, please do not mix with other coatings, or we will not be responsible for the quality problems in the process.